Обложка журнала
Title (English)
SMART COMPOSITE IN CONSTRUCTION
Language of publication
Russian, English
ISSN
2782-1919 (online)
Russian science citation index:
Yes 76115
Russian higher attestation Commission:
Yes K3

Informaciya dlya avtorov

 

Redakciya strogo priderzhivaetsya norm i pravil mezhdunarodnoy publikacionnoy etiki.

Pravovuyu osnovu obespecheniya publikacionnoy etiki sostavlyayut mezhdunarodnye standarty: polozheniya II Vsemirnoy konferencii po voprosam soblyudeniya dobrosovestnosti nauchnyh issledovaniy, polozheniya Komiteta po etike nauchnyh publikaciy (The Committee on Publication Ethics – COPE) i normy razdela «Avtorskoe pravo» Grazhdanskogo kodeksa RF. 

Predstavlenie stat'i v zhurnal podrazumevaet sleduyuschee:

  • rabota ne byla opublikovana v drugom zhurnale;
  • rabota ne nahoditsya na rassmotrenii v drugom zhurnale;
  • vse soavtory soglasny s publikaciey stat'i;
  • polucheno soglasie (v yavnoy ili neyavnoy forme) organizacii, na baze kotoroy  provedeno issledovanie.

Pri predstavlenii rukopisi v zhurnal avtory dolzhny ubedit'sya, chto vse citirovaniya oformleny korrektno, ukazany zaimstvovannye istochniki v podpisyah k risunkam i nadpisyam k tablicam. Esli takovye ne privedeny, predpolagaetsya, chto risunki i tablicy predstavlyayut soboy plod avtorskoy deyatel'nosti. Redakciya osuschestvlyaet proverku statey na antiplagiat i otklonyaet ili vozvraschaet avtoram rukopisi, esli original'nost' tekstov po rezul'tatam takoy proverki ne dostigaet 70-75 %.

Avtorskie prava

Avtory, napravlyayuschie svoi raboty v zhurnal, soglashayutsya so sleduyuschim:

  1. Avtory sohranyayut za soboy avtorskie prava na rabotu i predostavlyayut zhurnalu pravo pervoy publikacii.
  2. Avtory sohranyayut za soboy pravo zaklyuchat' otdel'nye kontraktnye dogovorennosti, kasayuschiesya neeksklyuzivnogo rasprostraneniya versii raboty v opublikovannom v zhurnale vide (naprimer, razmeschenie v institutskom hranilische, publikaciya v knige), so ssylkoy na original'nuyu publikaciyu v dannom zhurnale.

Privatnost'

Imena i adresa elektronnoy pochty, vvedennye na sayte dannogo zhurnala, ispol'zuyutsya isklyuchitel'no dlya dostizheniya celey, sovpadayuschih s missiey zhurnala; dostup k nim inyh lic i organizaciy dlya drugih celey ne predostavlyaetsya.

 

Pravila oformleniya statey dlya zhurnala

«Umnye kompozity v stroitel'stve» / «Smart Comprosite in Construction»

 

V zhurnale «Umnye kompozity v stroitel'stve Smart Composite in Construction» pechatayutsya raboty prepodavateley i sotrudnikov vysshih uchebnyh zavedeniy RF, RAN, RAASN i drugih issledovatel'skih organizaciy, rabotayuschih v sfere promyshlennogo i grazhdanskogo stroitel'stva i arhitektury, v tom chisle – zarubezhnyh.

Rubriki zhurnala

  • Stroitel'nye konstrukcii, zdaniya i sooruzheniya (tehnicheskie)
  • Stroitel'nye materialy i izdeliya (tehnicheskie)
  • Proektirovanie i stroitel'stvo dorog, metropolitenov, aerodromov, mostov i transportnyh tonneley (tehnicheskie)
  • Arhitektura zdaniy i sooruzheniy. Tvorcheskie koncepcii arhitekturnoy deyatel'nosti (tehnicheskie nauki; arhitektura)

Stat'i, napravlyaemye v zhurnal, dolzhny udovletvoryat' sleduyuschim trebovaniyam:

  1. Stat'ya dolzhna sootvetstvovat' profilyu i rubrikam zhurnala, obladat' aktual'nost'yu, noviznoy, imet' prikladnoe znachenie (i/ili teoreticheskoe obosnovanie). Vopros ob opublikovanii ili otklonenii stat'i reshaet redakcionnaya kollegiya zhurnala, i ee reshenie yavlyaetsya okonchatel'nym.
  2. Stat'i dolzhny predstavlyat' szhatoe, konkretnoe izlozhenie rezul'tatov, bez povtoreniya odnih i teh zhe dannyh v tekste, risunkah i tablicah.
  3. Vse predstavlennye stat'i dolzhny byt' nabrany 12 keglem, shrift Times New Roman, interval – 1.1. Polya: verhnee i nizhnee – 3 sm, levoe i pravoe – 2.5 sm. Abzacnyy otstup – 0.75 sm. Ob'em stat'i – 7-15 stranic, vklyuchaya annotaciyu i spisok literatury na russkom i angliyskom yazykah; chislo tablic – ne bolee 3, risunkov – ne bolee 5-6, dlya obzornoy stat'i – ne bolee 8, v tom chisle pomechennyh bukvami ab (kursiv) i t.d. Risunki, kak i tablicy, podpisi i zagolovki k nim, a takzhe primechaniya, razmeschayutsya po tekstu stat'i. V razdel «Obzornye stat'i» prinimayutsya materialy ob'emom ot 20 do 30-35 stranic.
  4. Pri oformlenii stat'i rekomenduetsya izbegat' upotrebleniya lyubyh sokrascheniy, krome obscheprinyatyh. Pervoe upominanie sokraschennogo termina obyazatel'no sleduet posle ego predstavleniya v polnom vide. Rukopisnye vstavki ne dopuskayutsya. Kavychki oformlyayutsya «elochkoy». Tekst nabiraetsya bez numeracii stranic.

Struktura stat'i

Pervaya stranica rukopisi oformlyaetsya shriftom s razmerom 12 pt. Na pervoy stroke ukazyvaetsya tip stat'i s vyravnivaniem sleva bez abzacnyh otstupov (Nauchnaya stat'ya, Obzornaya stat'ya). Na sleduyuschey stroke prostavlyaetsya indeks po universal'noy desyatichnoy klassifikacii (UDK). Posle UDK propuskaetsya odna stroka i daetsya po centru naimenovanie raboty (poluzhirnoe nachertanie). Propuskaetsya odna stroka i privodyatsya I.O. Familiya (poluzhirnoe nachertanie) kazhdogo avtora. Posle familii kazhdogo avtora nadstrochnym simvolom ukazyvaetsya snoska na affiliaciyu v vide cifry. Esli vse avtory predstavlyayut odnu i tu zhe organizaciyu, cifrovoe oboznachenie affiliacii ne ukazyvaetsya. Propuskaetsya odna stroka, nachinaya s pervogo nadstrochnogo nomera affiliacii, privoditsya polnoe Imya, Otchestvo, Familiya avtora (ili avtorov, esli takovyh, predstavlyayuschih dannuyu organizaciyu, neskol'ko), zatem, na sleduyuschey stroke  – naimenovanie organizacii (mesta raboty), goroda, strany i elektronnyy adres (kursiv) kazhdogo avtora iz dannoy organizacii. Propuskaetsya odna stroka i privoditsya polnoe Imya, Otchestvo, Familiya avtora (ili avtorov) drugoy organizacii, a na sleduyuschey stroke – naimenovanie drugoy organizacii (mesta raboty), goroda, strany i elektronnyy adres (kursiv). Propuskaetsya stroka, razmeschaetsya annotaciya so slov «Annotaciya.» ('Abstract.') (s tochkoy). Tekst annotacii dolzhen vklyuchat' 150-250 slov, vypolnennyh kursivnym nezhirnym nachertaniem, i zavershaetsya tochkoy. Posle annotacii i propuska odnoy stroki nabiraetsya «Klyuchevye slova:» ('Keywords:') (s dvoetochiem) i privoditsya 6-10 slovosochetaniy s kursivnym nachertaniem, bez tochki v konce. Cherez stroku ukazyvaetsya avtor, otvetstvennyy za perepisku, i ego elektronnaya pochta (kursivom). Vse vysheopisannye punkty sledom privodyatsya na angliyskom yazyke.

Blagodarnosti organizaciyam, nauchnym rukovoditelyam i drugim licam, okazavshim pomosch' pri napisanii stat'i, privodyatsya posle slova «Blagodarnosti:». Na angliyskom yazyke slova blagodarnosti privodyatsya posle slova 'Acknowledgments:'

Svedeniya o grantah i finansirovanii issledovaniya pri podgotovke i publikacii stat'i mogut byt' privedeny posle slova «Finansirovanie:» (na angliyskom yazyke – posle slov 'Funding:' ili 'Financial Support:').

Na pervoy stranice rukopisi (esli stat'ya predstavlena na angliyskom yazyke) vse vysheopisannye punkty privodyatsya tol'ko na angliyskom yazyke.

Osnovnoy tekst nauchnoy stat'i rekomenduetsya izlagat' soglasno strukture IMRAD, soderzhaschey sleduyuschie zagolovki: Vvedenie, Eksperimental'naya chast', Rezul'taty i ih obsuzhdenie, Vyvody, Spisok istochnikov. Kazhdyy zagolovok privoditsya propisnymi bukvami vysotoy 12 pt i vydelyaetsya odnoy pustoy strokoy pered nim i posle nego.

Risunki oformlyayutsya vnutri teksta, perenos strok podpisey na druguyu stranicu ne dopuskaetsya. Podpisi k risunkam privodyatsya srazu pod graficheskim izobrazheniem. Podpis' risunka sostavlyaetsya iz sokrascheniya «Ris.» (ili 'Fig.' dlya stat'i na angliyskom yazyke ili dlya perevoda podpisi), poryadkovogo nomera i otdelennogo tochkoy nazvaniya risunka, pri etom tekst, krome samogo nazvaniya, vydelyaetsya poluzhirnym nachertaniem. Sledom v stat'e na russkom yazyke privoditsya podpis' risunka na angliyskom yazyke. Esli risunok sostoit iz neskol'kih chastey, pomechennyh otdel'nymi bukvami, perenos lyuboy chasti risunka i primechaniya v vide bukvy na druguyu stranicu ne rekomenduetsya. Rekomenduetsya umen'shenie shrifta dlya podpisi do 10 pt (dopuskaetsya do 8 pt). Risunki raspolagayutsya tol'ko posle ih upominaniya (ili perekrestnoy ssylki) v tekste stat'i. Ssylka na kazhdyy risunok po tekstu stat'i privoditsya v obyazatel'nom poryadke i  privoditsya v skobkah s sokrascheniem «ris.» ('Fig.'), posle kotorogo ukazyvaetsya nomer, naprimer: (ris. 1) – pri predstavlenii raboty na russkom yazyke, (Fig. 1) – pri predstavlenii raboty na angliyskom yazyke.

Formuly rekomenduetsya oformlyat' vnutri tablicy, sostoyaschey iz dvuh stolbcov. V pervom stolbce privoditsya sama formula, oformlennaya redaktorom formul ili v vide izobrazheniya. Vo vtorom stolbce shirinoy 1 sm privoditsya poryadkovyy nomer formuly, zaklyuchennyy v skobki pri sozdanii perekrestnyh ssylok v tekste. Esli neobhodimost' davat' perekrestnye ssylki otsutstvuet, vtoroy stolbec ne sozdayut. Posle formuly stavitsya zapyataya, kogda privoditsya rasshifrovka simvolov formuly, ili tochka; poryadkovyy nomer formuly posle zapyatoy ili tochki raspolagaetsya na etoy zhe stroke, s vyravnivaniem po pravomu krayu.

Dlya stateynyh tablic privoditsya oboznachenie «Tablica» (ili 'Table' dlya stat'i na angliyskom yazyke), poryadkovyy nomer (bez oboznacheniya znaka nomera), a posle tochki daetsya naimenovanie tablicy. Tekst, krome samogo naimenovaniya tablicy vydelyaetsya poluzhirnym nachertaniem. Sledom v stat'e na russkom yazyke privoditsya nazvanie tablicy na angliyskom yazyke. Rekomenduetsya umen'shenie shrifta v tablice do 10 pt (dopuskaetsya do 8 pt). Tablicy raspolagayutsya tol'ko posle ih upominaniya (ili perekrestnoy ssylki) v tekste stat'i. Upominanie privedennoy tablicy po tekstu stat'i yavlyaetsya obyazatel'nym i privoditsya v skobkah, v kotoryh dayut oboznachenie, naprimer: (tabl. 1) – pri predstavlenii raboty na russkom yazyke, ( Table 1) – pri predstavlenii raboty na angliyskom yazyke.

Stat'ya zakanchivaetsya razdelom «Spisok istochnikov» (v stat'e na angliyskom yazyke –  razdelom 'References'), shrift Times New Roman, kegl' 10 pt. Optimal'noe kolichestvo citirovannyh istochnikov ot 15 do 20 (no ne menee 10), pri etom v spisok rekomenduetsya vklyuchit' ne menee 3 rabot, predstavlyayuschih zhurnaly iz yadra RINC ili vhodyaschih v bazy dannyh WoS/Scopus. V obzornyh rabotah prinimaetsya ne menee 40-50 ssylok na literaturnye istochniki. Pod spiskom literaturnyh istochnikov privodyatsya nadpisi kursivom, kazhdaya – s novoy stroki: «Postupila v redakciyu», «Odobrena posle recenzirovaniya», «Prinyata k opublikovaniyu».

Format

Redakciya prinimaet teksty, sohranennye v formatah .doc. ili .docx. Materialy, ne sootvetstvuyuschie ukazannym trebovaniyam i predstavlennye v drugih formatah, ne rassmatrivayutsya.

Oformlenie literaturnyh ssylok

Vse zatekstovye bibliograficheskie ssylki v stat'e na russkom yazyke sostavlyayut po GOST R 7.0.5 i GOST R 7.0.100, v stat'e na angliyskom yazyke – soglasno mezhdunarodnomu stilyu oformleniya Harvard.

Dopolnitel'no v stat'e na russkom yazyke privodyat perechen' zatekstovyh bibliograficheskih ssylok na latinice ('References'), soglasno mezhdunarodnomu stilyu oformleniya Harvard.

Izdaniya, kotorye ne perevodyatsya, neobhodimo ukazat' transliteraciey v sootvetstvii s obscheprinyatymi mezhdunarodnymi pravilami, v konce kazhdogo takogo istochnika dolzhna stoyat' pometka (in Russian) (sm. http://www.cas.org/expertise/cascontent/caplus/corejournals.html).

Dlya zhurnal'noy stat'i dolzhny byt' ukazany familii i inicialy vseh avtorov, nazvanie stat'i, sokraschennoe nazvanie zhurnala (esli dopuskaetsya, naprimer: Izv. vuzov. Himiya i him. tehnologiya) god, nomer toma, nomer ili vypusk, diapazon stranic i DOI (pri ih nalichii, v sluchae, esli citiruemaya stat'ya napechatana na russkom yazyke).

 

Primery oformleniya literaturnyh istochnikov (stat'i, monografii, patenty na izobretenie, internet-dannye)
na russkom i angliyskom yazykah

SPISOK ISTOChNIKOV

1. Treybaks E.A. Ispol'zovanie unikal'nyh svoystv kleenyh derevyannyh paneley CLT v stroitel'stve obschestvennyh zdaniy // Innovacii v nauke. 2017.  № 10 (71). S. 68-69.

2. Ammari M.S., Belhadj B., Bederina M., Ferhat A., Quéneudec M. Contribution of hybrid fibers on the improvement of sand concrete properties: Barley straws treated with hot water and steel fibers // Construction and building materials. 2020. Vol. 233, no. 8. DOI: 10.1016/j.conbuildmat.2010.117374

3. Titunin A.A., Zayceva K.V. Proektirovanie i proizvodstvo stroitel'nyh materialov iz drevesiny. Kompleksnyy podhod. Kostroma: Izd-vo Kostrom. gos. tehnol. un-ta, 2009. 185 s.

4. Yargina Z.N. Estetika goroda. M.: Stroyizdat, 1991. 365 s.

5. V Rossii budet obespecheno shirokoe vnedrenie mnogoetazhnogo derevyannogo domostroeniya // Minstroy Rossii: [sayt]. URL: https://minstroyrf.gov.ru/press/v-rossii-budet-obespecheno-shirokoe-vnedrenie-mnogoetazhnogo-derevyannogo-domostroeniya/ (data obrascheniya 10.10.2023). 

6. Citation guides / Mendeley [Elektronnyy resurs]. URL: https://www.mendeley.com/guides/citation-guides/ (data obrascheniya: 05.04.2022).

7. Patent № 2667367 Rossiyskaya Federaciya, MPK B28C 5/00 (2006.01), B28C 9/02 (2006.01). Sposob polucheniya betonnoy smesi s utilizaciey ranee poluchennyh ostatkov etoy smesi: opubl. 19.09.2018 / Kogan Artem Sergeevich.

Postupila v redakciyu 
Odobrena posle recenzirovaniya 
Prinyata k opublikovaniyu

REFERENCES

1. Treybaks, E. A. (2017) Utilization of unique properties of glued wood CLT panels in the construction of public buildings, Innovatsii v nauke, 10(71), pp. 68-69 (in Russian).

2. Ammari, M. S., Belhadj, B., Bederina, M., Ferhat, A. & Quéneudec, M. (2020) Contribution of hybrid fibers on the improvement of sand concrete properties: Barley straws treated with hot water and steel fibers, Construction and Building Materials, 233(8). DOI: 10.1016/j.conbuildmat.2019.117374.

3. Titunin, A. A. & Zaitseva, K. V. (2009) Design and production of construction materials of wood. Complex approach. Kostroma: Izd-vo Kostrom. gos. tekhnol. un-ta (in Russian).

4. Yargina, Z. N. (1991) Aesthetics of the city. Moscow: Stroyizdat (in Russian).

5. Ministry of Construction of Russia. (2022) Russia will ensure widespread introduction of multi-storey wooden house building [online]. Available at: https://minstroyrf.gov.ru/press/v-rossii-budet-obespecheno-shirokoe-vnedrenie-mnogoetazhnogo-derevyannogo-domostroeniya (accessed 10.10.2023) (in Russian).

6. Citation Guides / Mendeley [online]. Available at: https://www.mendeley.com/guides/citation-guides/ (accessed 05.04.2022).

7. Ferrari, G., Surico, F., Brocchi, A., Banfi, E., Maltese, C. & Squinzi, M. (2019) Method for recycling concrete, IT, Patent EP 2,468,695 A1.

Received
Approved after reviewing
Accepted

Publication Ethics

Ethical standards for publication exist to ensure high-quality scientific publications, public trust in scientific findings, and that people receive credit for their work and ideas. Journal Smart Composite in Construction publication ethics and research integrity help to ensure the accuracy and trustworthiness of an article. We adhere the provisions of the II World Conference on the Integrity of Scientific Research, the provisions of the Committee on Ethics of Scientific Publications (The Committee on Publication Ethics – COPE).

  1. Authorship and Authors' Responsibilities

1.1. When submitting a manuscript to the Journal, author (authors) confirming the manuscript has not been published previously (except in the form of an abstract, a published lecture or academic thesis), the manuscript is not under consideration for publication elsewhere, and checked for plagiarism from other publications. In case the work is based on material previously published as a report, preprint, proceedings, etc. author (authors) should inform the Editorial Board.

1.2. Authors are the persons who have contributed sufficiently to the research, analysis, etc. to be listed on the byline of the manuscript. Before submitting, all authors must approve the manuscript and give their consent for submission and publication. The Corresponding author takes primary responsibility for communication with the Journal during the manuscript submission, peer review, and publication process. The Corresponding Author informs the co-authors of the manuscript’s status throughout the submission, review, and publication process.

1.3. Researchers should present their results honestly and without fabrication, falsification, or inappropriate data manipulation.

1.4. The author (authors) guarantees the absence of plagiarism in the manuscript. In case the fragments of works or statements of other persons are used, the authors provide appropriate bibliographic references or citations. In case of using of other researchers works or statements, the authors provide appropriate bibliographic references or quotations.

1.5. Authors should prevent self-plagiarism and refer to their previous works correctly. Author (authors) is not allowed to present the identical data in several publications, copying and paraphrasing the same information.

1.6. The authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed as influencing the results or interpretation of their manuscript.

1.7. When an author (authors) discovers a significant error or inaccuracy in his/her own published work, it is the authors obligation to promptly notify the Journal Editor and cooperate with the Journal to retract or correct the work.

  1. Reviewers Roles and Responsibilities

2.1. Reviewing upholds the integrity of the Journal by identifying invalid research and helping to maintain the quality of the Journal. Our collaborative peer review maximizes manuscript quality by using a rigorous, constructive, and transparent review process managed by active researchers. Moreover, reviewing is a necessary component of formal scholarly communications providing accomplished academic approach. We believe, the authors can ensure the rigorous standards of the scientific process by taking part in the peer-review system.

2.2. An insufficiently competent or time-constrained reviewer should promptly notify the Editor and request to be excluded from the manuscript review process.

2.3. Any manuscript submitted is a confidential document. This paper not be discussed with any other individual not authorised by the Editor.

2.4. The reviewer is obliged to assess the manuscript objectively. Personal criticism of the author is unacceptable. Reviewers should express their views clearly with appropriate supporting arguments.

2.5. Reviewers should pay attention to substantial drawbacks and gaps in the references. Any statement (argument, conclusion, etc.) published previously in the manuscript should be accompanied by an appropriate reference. Reviewers should identify works that are relevant to the paper, which were not referred to by the authors. Every allegation that an observation, conclusion, or argument has been made previously must be supported by a reference. The reviewer should also draw the Editor's attention to any significant similarities and intersections between the manuscript under consideration and any other published paper of which he or she is personally aware.

2.6. Unpublished materials contained in the submitted manuscript should not be used in the reviewer's own research without the explicit written consent of the author (authors). The information or ideas obtained during the review should remain confidential and not be used for personal purposes until the publication of the paper and without the permission of the author (authors). Information or ideas obtained during the reviewing related to benefits should be kept confidential.

2.7. Reviewers should not participate in the review of manuscripts in the event of conflicts of interest due to competitive, collaborative, and other interactions and relationships with any of the authors, companies or other organizations associated with the submitted work.

  1. Editors Responsibilities

3.1. The Editor of the Journal is solely and independently responsible for deciding which of the articles submitted to the Journal should be published. Validation of the work in question and of its importance to researchers and readers must always support such decisions. Basis of the publication decision is always the scientific relevance of the work, its relevance and significance, scientific novelty, and reliability.

The Editor makes objective decision regardless of commercial considerations and provides fair and efficient review process.

3.2. The Editor evaluates the articles for their intellectual content, regardless of race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the authors.

3.3. The Editor should not disclose any information about the submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial consultants, and the publisher, as the case may be.

3.4. Editors manage conflict situations arising in the process and use all available methods to resolve them.

3.5. An Editor presented with convincing evidence that the substance or conclusions of a published article are erroneous should promote the publication of a correction or retraction.

  1. Publisher Responsibilities 

4.1. The publisher follows principles and procedures that facilitate the performance of ethical duties by editors, reviewers, and authors in accordance with these requirements. The publisher should be sure that its overall revenue setting did not influence the Editors' decision making.

4.2. The publisher should adopt policies and procedures that support editors, reviewers, and authors of the Journal in performing their ethical duties under these ethics guidelines. The publisher should support editors in the review of complaints raised concerning ethical issues and help communications with other journals and/or publishers where this is useful to editors.

4.3. The publisher should develop codes of practice and inculcate industry standards for best practice on ethical matters, errors, and retractions.

  1. Articles withdrawal and retraction

When considering situations related to the withdrawal(retraction) of articles, the Editorial Board and publisher of the Journal Smart Composites in Construction are guided by the recommendations of the Committee on Publication Ethics (COPE Retraction Guidelines) and Alliance of Independent Regional Publishers, AIRP (The Rules of Withdrawal (Retraction) of an Article from Publication).

Reasons for withdrawal of an article:

  • falsification is publishing data or conclusions that were not generated by experiments or observations by data manipulation.
  • duplication of submitted materials in several editions.
  • plagiarism.

If authors wish to withdraw an article after it has been accepted, they should communicate their decision to the Journal's Editorial Board as soon as possible. The process may involve sending an official withdrawal request along with a brief explanation of the reason for the withdrawal.

After withdrawal, the article remains on the Journal's website as part of the corresponding issue and retains the DOI identifier but is marked as withdrawn one. A note to that effect is made in the issues' Table of Contents. The original article is retained unchanged except for a watermark on the .pdf indicating on each page that it is “retracted.”

The Editorial Board publishes a statement on the withdrawal of the article with the reasons and the date of retraction on the official website of the Journal and in the forthcoming printed issue.

Information on withdrawal of the article and its PDF-version with appropriate labelling are sent to the National Electronic Library (elibrary.ru) and other bibliographic bases the Journal included. The information is also submitted to the Alliance of Independent Regional Publishers, AIRP for entry it into the Unified Database of Retracted Articles.

Publication fee

No fee is charged from the authors during the submission, evaluation, and publication process.

The Editorial Board does not charge the authors for the manuscript submission, reviewing, or publication.

Disclosure and Conflicts of Interest

Unpublished materials disclosed in a submitted manuscript must not be used in own research without the express written consent of the author (authors).

Information or ideas obtained during the reviewing related to benefits should be kept confidential.

Reviewers should not participate in the review of manuscripts in the event of conflicts of interest due to competitive, collaborative, and other interactions and relationships with any of the authors, companies or other organizations associated with the submitted work.

Plagiarism

The Editorial Board of the Journal  Smart Composites in Construction, when reviewing the manuscript can undergo a multi-step anti-plagiarism check independently verify the received materials using the Anti-Plagiarism system. In case of plagiarism detection, the Editorial Board acts in accordance with COPE rules.

Preprint and Postprint Policy

When submitting an article, the author is required to confirm the manuscript has not been published or accepted for publication in another scientific Journal. When referring to an article published in the Journal Smart Composites in Construction, the publisher asks you to place a link (the full URL of the material) on the official website of the Journal.

Articles previously posted by authors on personal or public sites not affiliated with other publishers are allowed for review

Polozhenie o recenzirovanii rukopisey v zhurnale

«Umnye kompozity v stroitel'stve» / «Smart Comprosite in Construction»

 

  1. Obschie polozheniya

1.1 Nastoyaschee Polozhenie ustanavlivaet proceduru ekspertnoy ocenki rukopisey, napravlyaemyh v redakciyu zhurnala «Umnye kompozity v stroitel'stve Smart Composite in Construction».

1.2 Cel'yu ekspertnoy ocenki yavlyaetsya obespechenie vysokogo kachestva materialov, publikuemyh na stranicah zhurnala.

1.3 Dannoe Polozhenie razrabotano v sootvetstvii s publikacionnoy etikoy zhurnala «Umnye kompozity v stroitel'stve Smart Composite in Construction». 

  1. Poryadok recenzirovaniya statey, napravlennyh v redakciyu recenziruemogo izdaniya

2.1 Izdanie osuschestvlyaet recenzirovanie vseh postupayuschih v redakciyu materialov, sootvetstvuyuschih tematike, s cel'yu ih ekspertnoy ocenki. Vse recenzenty yavlyayutsya priznannymi specialistami po tematike recenziruemyh materialov i imeyut v techenie poslednih 3 let (k momentu polucheniya rukopisi) publikacii po tematike recenziruemoy stat'i.

2.2 Postupivshaya rukopis' prohodit process pervichnoy ocenki, s pozicii sootvetstviya formal'nym trebovaniyam izdaniya, a imenno: tematike zhurnala i perechnyu podderzhivaemyh nauchnyh special'nostey, pravilam oformleniya statey, original'nosti, yasnosti i logichnosti izlozheniya. V sluchae nesootvetstviya etim trebovaniyam stat'ya ne prinimaetsya k rassmotreniyu, o chem redakciya izveschaet avtora, s ukazaniem prichiny otkaza.

2.3 Reshenie o sootvetstvii rukopisi formal'nym trebovaniyam izdaniya prinimaetsya v techenie 15 dney, nachinaya s daty postupleniya rukopisi v redakciyu.

2.4 Recenzentom ne mozhet byt' avtor ili soavtor recenziruemoy stat'i, a takzhe nauchnye rukovoditeli soiskateley uchenoy stepeni i sotrudniki podrazdeleniya, v kotorom rabotaet avtor, predstavivshiy stat'yu. Recenzenty ne imeyut prava ispol'zovat' v lichnyh celyah recenziruemye rukopisi i peredavat' ih tret'im licam. Srok recenzirovaniya rukopisey ne dolzhen prevyshat' 30 kalendarnyh dney s momenta napravleniya rukopisi recenzentu. Okonchatel'noe reshenie ob opublikovanii postupivshih materialov redakciya zhurnala prinimaet posle rassmotreniya originala recenzii.

2.5 Redakciya izdaniya napravlyaet avtoram predstavlennyh materialov kopii recenziy ili motivirovannyy otkaz, a takzhe obyazuetsya napravlyat' kopii recenziy v Ministerstvo nauki i vysshego obrazovaniya Rossiyskoy Federacii pri postuplenii sootvetstvuyuschego zaprosa.

  1. Trebovaniya k soderzhaniyu recenzii

3.1 Recenziya dolzhna soderzhat' ob'ektivnyy analiz rukopisi, otrazhat' ocenku kachestva rukopisi ekspertom.

3.2 Recenziya sostavlyaetsya po standartnoy forme, predlagaemoy redakciey, ili v svobodnom vide i dolzhna soderzhat' sleduyuschie elementy:

– aktual'nost' tematiki issledovaniya, predstavlennoy v rukopisi;

– nauchnaya novizna materialov;

– sootvetstvie soderzhaniya rukopisi ee nazvaniyu;

– sootvetstvie ispol'zovannyh avtorom metodik, rekomendaciy i rezul'tatov issledovaniya sovremennym dostizheniyam nauki i praktiki;

– dostovernost' izlozhennyh faktov, polnota raskrytiya temy;

– celesoobraznost' i obosnovannost' nalichiya v rukopisi tablic, grafikov, inyh illyustracionnyh i demonstracionnyh materialov;

– sootvetstvie vyvodov celyam i zadacham issledovaniya, ih argumentirovannost';

– kachestvo prorabotki literaturnyh istochnikov;

– ocenka lichnogo vklada avtora rukopisi v reshenie izuchaemoy problemy;

– kachestvo oformleniya rukopisi: stil', terminologiya, formulirovki.

3.3 Zaklyuchitel'naya chast' recenzii dolzhna soderzhat' rekomendaciyu:

– ob opublikovanii rukopisi v zhurnale;

– o dorabotke rukopisi (s ukazaniem konkretnyh zamechaniy ili rekomendaciy);

– ob otklonenii rukopisi (s obosnovaniem mneniya eksperta).

3.4 Recenziya podpisyvaetsya ekspertom s rasshifrovkoy ego familii, imeni i otchestva, prostanovkoy daty, ukazaniem uchenoy stepeni, uchenogo zvaniya i zanimaemoy dolzhnosti na moment rassmotreniya rukopisi.

3.5 Original recenzii napravlyaetsya v redakcionnuyu kollegiyu zhurnala.

  1. Poryadok predstavleniya recenzii avtoram

4.1 Recenziya (libo ee chast') napravlyaetsya glavnym redaktorom zhurnala ili ego zamestitelem po zaprosu avtora rukopisi, bez ukazaniya familii, dolzhnosti i mesta raboty recenzenta.

4.2 Pri polozhitel'noy ocenke rukopisi recenzentom i redakcionnoy kollegiey zhurnala, glavnyy redaktor ili ego zamestitel' soobschaet avtoru o prinyatii ego rukopisi i planiruemom sroke opublikovaniya predstavlennyh materialov.

4.3 Pri vydache recenzentom rekomendaciy po dorabotke ili zamechaniy rukopis' napravlyaetsya avtoru s ukazaniem sroka, v techenie kotorogo eti zamechaniya dolzhny byt' ustraneny, a rukopis' dorabotana. Dorabotannaya rukopis' s otvetami avtora na zamechaniya (rekomendacii) napravlyaetsya na povtornoe rassmotrenie etomu zhe recenzentu.

4.4 V sluchae konflikta interesov ili nesoglasiya avtora s zamechaniyami (rekomendaciyami) recenzenta, rukopis', po hodataystvu avtora, mozhet byt' napravlena na povtornoe recenzirovanie drugomu ekspertu.

4.5 Pri poluchenii otricatel'noy recenzii na rukopis' redakcionnaya kollegiya zhurnala imeet pravo napravit' materialy na dopolnitel'noe recenzirovanie ili dorabotku avtoru s posleduyuschim povtornym recenzirovaniem, ili otklonit' rukopis'.

4.6 V sluchae otkloneniya rukopisi avtoru napravlyaetsya pis'mo s ukazaniem prichin otkaza prinyat' materialy k opublikovaniyu.

  1. Zaklyuchenie

5.1 Recenzii hranyatsya v redakcii zhurnala v techenie 5 let.

5.2 Recenzii predstavlyayutsya v VAK pri Ministerstve nauki i vysshego obrazovaniya Rossiyskoy Federacii pri nalichii zaprosa so storony VAK.

Fedosov Sergey  — Editor-in-Chief
Moscow State University of Civil Engineering (Kafedra «Tehnologiya i organizaciya stroitel'nogo proizvodstva», Professor)
doctor of technical sciences
academician Russian Academy of Architecture and Construction Sciences ,
professor
Moscow, Moscow, Russian Federation
Razgovorov Pavel  — Deputy Editor-in-Chief
Yaroslavl State Technical University (Nachal'nik upravleniya organizacii nauchno-issledovatel'skoy i intellektual'noy deyatel'nosti)
doctor of technical sciences
professor
Yaroslavl, Yaroslavl, Russian Federation
Kalayeva Sahiba  — Executive secretary
Yaroslavl State Technical University (Associate Professor)
doctor of technical sciences
Yaroslavl, Yaroslavl, Russian Federation
Abdykalykov Akymbek Abdykalykovich  — Member of the editorial team
Kyrgyzskiy gosudarstvennyy universitet stroitel'stva, transporta i arhitektury im. N. Isanova (Rector)
doctor of technical sciences
professor
Kyrgyzstan
Akimov Pavel  — Member of the editorial team
Moscow State University of Civil Engineering (Rector)
doctor of technical sciences
academician Russian Academy of Architecture and Construction Sciences ,
professor
Moscow, Moscow, Russian Federation
Bakanov Maksim  — Member of the editorial team
Ivanovskaya pozharno-spasatel'naya akademiya GPS MChS Rossii (Nachal'nik uchebno-nauchnogo kompleksa «Pozharotushenie»)
doctor of technical sciences
Academic rank Sovetnik RAASN
docent
Ivanovo, Ivanovo, Russian Federation
Belov Vladimir  — Member of the editorial team
Tver Stare University (Kafedra "proizvodstva stroitel'nyh izdeliy i konstrukciy", Zaveduyuschiy kafedroy)
doctor of technical sciences
Academic rank Sovetnik RAASN
professor
Tver, Tver, Russian Federation
Belostockiy Aleksandr  — Member of the editorial team
Moscow State University of Civil Engineering (Kafedra informatiki i prikladnoy matematiki., Professor)
doctor of technical sciences
academician Russian Academy of Architecture and Construction Sciences ,
professor
Moscow, Moscow, Russian Federation
Vatin Nikolay  — Member of the editorial team
Saint-Petersburg State University of Architecture and Construction (kafedra «Stroitel'stvo unikal'nyh zdaniy i sooruzheniy», Professor)
doctor of technical sciences
Academic rank Sovetnik RAASN
professor
Sankt-Peterburg, St. Petersburg, Russian Federation
Gotovcev Valeriy  — Member of the editorial team
Yaroslavl State Technical University (Kafedra «Upravlenie predpriyatiem»., Professor)
doctor of technical sciences
professor
Yaroslavl, Yaroslavl, Russian Federation
Zaharov Aleksandr  — Member of the editorial team
OOO «Kvartal-Invest» (Zamestitel' direktora po arhitekturno-gradostroitel'nomu proektirovaniyu)
candidate of architecture
Academic rank Sovetnik RAASN
professor
Ivanovo, Ivanovo, Russian Federation
Kapranova Anna  — Member of the editorial team
Yaroslavl State Technical University (Kafedra "Teoreticheskaya i prikladnaya mehanika", Zaveduyuschaya kafedroy)
doctor of physical and mathematical sciences
professor
Yaroslavl, Yaroslavl, Russian Federation
Kolchunov Vitaliy  — Member of the editorial team
Southwest State University (Kafedra unikal'nyh zdaniy i sooruzheniy, Zaveduyuschiy kafedroy)
doctor of technical sciences
academician Russian Academy of Architecture and Construction Sciences ,
professor
Kursk, Kursk, Russian Federation
Kotlov Vitaliy  — Member of the editorial team
Volga State University of Technology (Prorektor po vospitatel'noy rabote)
doctor of technical sciences
Academic rank Sovetnik RAASN
docent
Yoshkar-Ola, Yoshkar-Ola, Russian Federation
Kudryashov Nikolay  — Member of the editorial team
Yaroslavl State Technical University (Nauchnyy rukovoditel' Instituta arhitektury i dizayna)
candidate of architecture
professor
Yaroslavl, Yaroslavl, Russian Federation
Lebedev Anton  — Member of the editorial team
Yaroslavl State Technical University (Kafedra tehnologicheskih mashin i oborudovaniya, Professor)
doctor of technical sciences
docent
Yaroslavl, Yaroslavl, Russian Federation
Leonovich Sergey Nikolaevich  — Member of the editorial team
Belarusian National Technical University (Kafedra "Stroitel'nye materialy i tehnologii stroitel'stva", Head of the Department)
doctor of technical sciences
academician Russian Academy of Architecture and Construction Sciences ,
professor
Minsk, Belarus
Mondrus Vladimir L'vovich  — Member of the editorial team
Moscow State University of Civil Engineering (Kafedra stroitel'noy i teoreticheskoy mehaniki, Zaveduyuschiy kafedroy)
doctor of technical sciences
corresponding member Russian Academy of Architecture and Construction Sciences ,
professor
Moscow, Russian Federation
Mohov Andrey  — Member of the editorial team
Moscow State University of Civil Engineering (Kafedra avtomatiki i elektrosnabzheniya, Professor)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
Nizina Tatyana  — Member of the editorial team
Ogarev Mordovia State University (I.o. direktora Instituta arhitektury i stroitel'stva)
doctor of technical sciences
professor
Saransk, Saransk, Russian Federation
Pospelov Pavel  — Member of the editorial team
The Moscow State Technical University - MADI (Kafedra izyskaniya i proektirovaniya, Zaveduyuschiy kafedroy)
doctor of technical sciences
professor
Moscow, Moscow, Russian Federation
Puharenko Yuriy  — Member of the editorial team
Saint-Petersburg State University of Architecture and Construction (Kafedra tehnologii stroitel'nyh materialov i metrologii, Zaveduyuschiy kafedroy)
doctor of technical sciences
corresponding member Russian Academy of Architecture and Construction Sciences ,
professor
Sankt-Peterburg, St. Petersburg, Russian Federation
Rudobashta Stanislav Pavlovich  — Member of the editorial team
Russian State Agrarian University - Moscow Timiryazev Agricultural Academy (Kafedra teplotehniki, gidravliki i energoobespecheniya predpriyatiy, Professor)
doctor of technical sciences
professor
Moscow, Russian Federation
Rumyanceva Varvara  — Member of the editorial team
Ivanovo State Polytechnic University (Direktor instituta informacionnyh tehnologiy, estestvennyh i gumanitarnyh nauk)
doctor of technical sciences
corresponding member Russian Academy of Architecture and Construction Sciences ,
professor
Ivanovo, Ivanovo, Russian Federation
Selyaev Vladimir Pavlovich  — Member of the editorial team
Ogarev Mordovia State University (Kafedra stroitel'nyh konstrukciy, Zaveduyuschiy kafedroy)
doctor of technical sciences
academician Russian Academy of Architecture and Construction Sciences ,
professor
Saransk, Saransk, Russian Federation
Tarshis Mikhail  — Member of the editorial team
Yaroslavl State Technical University (Kafedra "Teoreticheskaya i prikladnaya mehanika", Professor)
doctor of technical sciences
docent
Yaroslavl, Yaroslavl, Russian Federation
Travush Vladimir  — Member of the editorial team
ZAO "Gorproekt" (Glavnyy konstruktor)
doctor of technical sciences
Academic rank Vice-prezident RAASN
academician Russian Academy of Architecture and Construction Sciences
Moscow, Moscow, Russian Federation
Treschev Aleksandr  — Member of the editorial team
Tula State University (Kafedra stroitel'stva, stroitel'nyh materialov i konstrukciy, Zaveduyuschiy kafedroy)
doctor of technical sciences
corresponding member Russian Academy of Architecture and Construction Sciences ,
professor
Tula, Tula, Russian Federation
Fedoseev Vadim  — Member of the editorial team
Ivanovo State Polytechnic University (Kafedra organizacii proizvodstva i gorodskogo hozyaystva, Professor)
doctor of technical sciences
professor
Ivanovo, Ivanovo, Russian Federation
Mitrović Radivoje  — Foreign member of the editorial team
Belgrade University (Dekan fakul'teta mashinostroeniya)
doctor of technical sciences
professor
Serbia
Dobrokhotov Vladimir Borisovich  — Editor
Yaroslavl, Russian Federation
Tyukina Lyudmila  — English translation
Yaroslavl State Technical University
Yaroslavl, Yaroslavl, Russian Federation
Frolov Aleksandr  — Layout designer
Yaroslavl State Technical University (kafedra "Obschaya i fizicheskaya himiya", Associate Professor)
candidate of chemical sciences
Yaroslavl, Yaroslavl, Russian Federation
ORCID:0000-0002-0491-7452
BUILDINGS, FACILITIES AND STRUCTURES
CONSTRUCTION MATERIALS AND PRODUCTS
DESIGN AND CONSTRUCTION OF ROADS, SUBWAYS, AIRPORTS, BRIDGES AND TRANSPORT TUNNELS
ARCHITECTURE OF BUILDINGS AND FACILITIES. CREATIVE CONCEPTS OF ARCHITECTURAL ACTIVITY
UNCATEGORIZED

Архивные рубрики

ENVIRONMENTAL SAFETY OF CONSTRUCTION AND URBAN MANAGEMENT
Archived
Publisher
Yaroslavl State Technical University
Founder
Yaroslavl State Technical University
The certificate of registration of the periodical
ЭЛ № ФС 77 - 79733

Founder: Federal State Budgetary Educational Institution Of Higher Education “Yaroslavl State Technical University”

Editorial office address: 88, Moskovsky Prosp., Yaroslavl, 150023, Russia

Published with the assistance of Russian Academy of Architecture and Construction Sciences

Registration: Certificate EL No FS 77 - 79733 (27 November 2020)

Frequency: Quarterly

Subscription and distribution: Open Access

Publisher: Federal State Budgetary Educational Institution Of Higher Education “Yaroslavl State Technical University"

Publisher  addres: 88, Moskovsky Prosp., Yaroslavl, 150023, Russia

ISSN: 2782-1919

Informaciya dlya avtorov

 

Redakciya strogo priderzhivaetsya norm i pravil mezhdunarodnoy publikacionnoy etiki.

Pravovuyu osnovu obespecheniya publikacionnoy etiki sostavlyayut mezhdunarodnye standarty: polozheniya II Vsemirnoy konferencii po voprosam soblyudeniya dobrosovestnosti nauchnyh issledovaniy, polozheniya Komiteta po etike nauchnyh publikaciy (The Committee on Publication Ethics – COPE) i normy razdela «Avtorskoe pravo» Grazhdanskogo kodeksa RF. 

Predstavlenie stat'i v zhurnal podrazumevaet sleduyuschee:

  • rabota ne byla opublikovana v drugom zhurnale;
  • rabota ne nahoditsya na rassmotrenii v drugom zhurnale;
  • vse soavtory soglasny s publikaciey stat'i;
  • polucheno soglasie (v yavnoy ili neyavnoy forme) organizacii, na baze kotoroy  provedeno issledovanie.

Pri predstavlenii rukopisi v zhurnal avtory dolzhny ubedit'sya, chto vse citirovaniya oformleny korrektno, ukazany zaimstvovannye istochniki v podpisyah k risunkam i nadpisyam k tablicam. Esli takovye ne privedeny, predpolagaetsya, chto risunki i tablicy predstavlyayut soboy plod avtorskoy deyatel'nosti. Redakciya osuschestvlyaet proverku statey na antiplagiat i otklonyaet ili vozvraschaet avtoram rukopisi, esli original'nost' tekstov po rezul'tatam takoy proverki ne dostigaet 70-75 %.

Avtorskie prava

Avtory, napravlyayuschie svoi raboty v zhurnal, soglashayutsya so sleduyuschim:

  1. Avtory sohranyayut za soboy avtorskie prava na rabotu i predostavlyayut zhurnalu pravo pervoy publikacii.
  2. Avtory sohranyayut za soboy pravo zaklyuchat' otdel'nye kontraktnye dogovorennosti, kasayuschiesya neeksklyuzivnogo rasprostraneniya versii raboty v opublikovannom v zhurnale vide (naprimer, razmeschenie v institutskom hranilische, publikaciya v knige), so ssylkoy na original'nuyu publikaciyu v dannom zhurnale.

Privatnost'

Imena i adresa elektronnoy pochty, vvedennye na sayte dannogo zhurnala, ispol'zuyutsya isklyuchitel'no dlya dostizheniya celey, sovpadayuschih s missiey zhurnala; dostup k nim inyh lic i organizaciy dlya drugih celey ne predostavlyaetsya.

 

Pravila oformleniya statey dlya zhurnala

«Umnye kompozity v stroitel'stve» / «Smart Comprosite in Construction»

 

V zhurnale «Umnye kompozity v stroitel'stve Smart Composite in Construction» pechatayutsya raboty prepodavateley i sotrudnikov vysshih uchebnyh zavedeniy RF, RAN, RAASN i drugih issledovatel'skih organizaciy, rabotayuschih v sfere promyshlennogo i grazhdanskogo stroitel'stva i arhitektury, v tom chisle – zarubezhnyh.

Rubriki zhurnala

  • Stroitel'nye konstrukcii, zdaniya i sooruzheniya (tehnicheskie)
  • Stroitel'nye materialy i izdeliya (tehnicheskie)
  • Proektirovanie i stroitel'stvo dorog, metropolitenov, aerodromov, mostov i transportnyh tonneley (tehnicheskie)
  • Arhitektura zdaniy i sooruzheniy. Tvorcheskie koncepcii arhitekturnoy deyatel'nosti (tehnicheskie nauki; arhitektura)

Stat'i, napravlyaemye v zhurnal, dolzhny udovletvoryat' sleduyuschim trebovaniyam:

  1. Stat'ya dolzhna sootvetstvovat' profilyu i rubrikam zhurnala, obladat' aktual'nost'yu, noviznoy, imet' prikladnoe znachenie (i/ili teoreticheskoe obosnovanie). Vopros ob opublikovanii ili otklonenii stat'i reshaet redakcionnaya kollegiya zhurnala, i ee reshenie yavlyaetsya okonchatel'nym.
  2. Stat'i dolzhny predstavlyat' szhatoe, konkretnoe izlozhenie rezul'tatov, bez povtoreniya odnih i teh zhe dannyh v tekste, risunkah i tablicah.
  3. Vse predstavlennye stat'i dolzhny byt' nabrany 12 keglem, shrift Times New Roman, interval – 1.1. Polya: verhnee i nizhnee – 3 sm, levoe i pravoe – 2.5 sm. Abzacnyy otstup – 0.75 sm. Ob'em stat'i – 7-15 stranic, vklyuchaya annotaciyu i spisok literatury na russkom i angliyskom yazykah; chislo tablic – ne bolee 3, risunkov – ne bolee 5-6, dlya obzornoy stat'i – ne bolee 8, v tom chisle pomechennyh bukvami ab (kursiv) i t.d. Risunki, kak i tablicy, podpisi i zagolovki k nim, a takzhe primechaniya, razmeschayutsya po tekstu stat'i. V razdel «Obzornye stat'i» prinimayutsya materialy ob'emom ot 20 do 30-35 stranic.
  4. Pri oformlenii stat'i rekomenduetsya izbegat' upotrebleniya lyubyh sokrascheniy, krome obscheprinyatyh. Pervoe upominanie sokraschennogo termina obyazatel'no sleduet posle ego predstavleniya v polnom vide. Rukopisnye vstavki ne dopuskayutsya. Kavychki oformlyayutsya «elochkoy». Tekst nabiraetsya bez numeracii stranic.

Struktura stat'i

Pervaya stranica rukopisi oformlyaetsya shriftom s razmerom 12 pt. Na pervoy stroke ukazyvaetsya tip stat'i s vyravnivaniem sleva bez abzacnyh otstupov (Nauchnaya stat'ya, Obzornaya stat'ya). Na sleduyuschey stroke prostavlyaetsya indeks po universal'noy desyatichnoy klassifikacii (UDK). Posle UDK propuskaetsya odna stroka i daetsya po centru naimenovanie raboty (poluzhirnoe nachertanie). Propuskaetsya odna stroka i privodyatsya I.O. Familiya (poluzhirnoe nachertanie) kazhdogo avtora. Posle familii kazhdogo avtora nadstrochnym simvolom ukazyvaetsya snoska na affiliaciyu v vide cifry. Esli vse avtory predstavlyayut odnu i tu zhe organizaciyu, cifrovoe oboznachenie affiliacii ne ukazyvaetsya. Propuskaetsya odna stroka, nachinaya s pervogo nadstrochnogo nomera affiliacii, privoditsya polnoe Imya, Otchestvo, Familiya avtora (ili avtorov, esli takovyh, predstavlyayuschih dannuyu organizaciyu, neskol'ko), zatem, na sleduyuschey stroke  – naimenovanie organizacii (mesta raboty), goroda, strany i elektronnyy adres (kursiv) kazhdogo avtora iz dannoy organizacii. Propuskaetsya odna stroka i privoditsya polnoe Imya, Otchestvo, Familiya avtora (ili avtorov) drugoy organizacii, a na sleduyuschey stroke – naimenovanie drugoy organizacii (mesta raboty), goroda, strany i elektronnyy adres (kursiv). Propuskaetsya stroka, razmeschaetsya annotaciya so slov «Annotaciya.» ('Abstract.') (s tochkoy). Tekst annotacii dolzhen vklyuchat' 150-250 slov, vypolnennyh kursivnym nezhirnym nachertaniem, i zavershaetsya tochkoy. Posle annotacii i propuska odnoy stroki nabiraetsya «Klyuchevye slova:» ('Keywords:') (s dvoetochiem) i privoditsya 6-10 slovosochetaniy s kursivnym nachertaniem, bez tochki v konce. Cherez stroku ukazyvaetsya avtor, otvetstvennyy za perepisku, i ego elektronnaya pochta (kursivom). Vse vysheopisannye punkty sledom privodyatsya na angliyskom yazyke.

Blagodarnosti organizaciyam, nauchnym rukovoditelyam i drugim licam, okazavshim pomosch' pri napisanii stat'i, privodyatsya posle slova «Blagodarnosti:». Na angliyskom yazyke slova blagodarnosti privodyatsya posle slova 'Acknowledgments:'

Svedeniya o grantah i finansirovanii issledovaniya pri podgotovke i publikacii stat'i mogut byt' privedeny posle slova «Finansirovanie:» (na angliyskom yazyke – posle slov 'Funding:' ili 'Financial Support:').

Na pervoy stranice rukopisi (esli stat'ya predstavlena na angliyskom yazyke) vse vysheopisannye punkty privodyatsya tol'ko na angliyskom yazyke.

Osnovnoy tekst nauchnoy stat'i rekomenduetsya izlagat' soglasno strukture IMRAD, soderzhaschey sleduyuschie zagolovki: Vvedenie, Eksperimental'naya chast', Rezul'taty i ih obsuzhdenie, Vyvody, Spisok istochnikov. Kazhdyy zagolovok privoditsya propisnymi bukvami vysotoy 12 pt i vydelyaetsya odnoy pustoy strokoy pered nim i posle nego.

Risunki oformlyayutsya vnutri teksta, perenos strok podpisey na druguyu stranicu ne dopuskaetsya. Podpisi k risunkam privodyatsya srazu pod graficheskim izobrazheniem. Podpis' risunka sostavlyaetsya iz sokrascheniya «Ris.» (ili 'Fig.' dlya stat'i na angliyskom yazyke ili dlya perevoda podpisi), poryadkovogo nomera i otdelennogo tochkoy nazvaniya risunka, pri etom tekst, krome samogo nazvaniya, vydelyaetsya poluzhirnym nachertaniem. Sledom v stat'e na russkom yazyke privoditsya podpis' risunka na angliyskom yazyke. Esli risunok sostoit iz neskol'kih chastey, pomechennyh otdel'nymi bukvami, perenos lyuboy chasti risunka i primechaniya v vide bukvy na druguyu stranicu ne rekomenduetsya. Rekomenduetsya umen'shenie shrifta dlya podpisi do 10 pt (dopuskaetsya do 8 pt). Risunki raspolagayutsya tol'ko posle ih upominaniya (ili perekrestnoy ssylki) v tekste stat'i. Ssylka na kazhdyy risunok po tekstu stat'i privoditsya v obyazatel'nom poryadke i  privoditsya v skobkah s sokrascheniem «ris.» ('Fig.'), posle kotorogo ukazyvaetsya nomer, naprimer: (ris. 1) – pri predstavlenii raboty na russkom yazyke, (Fig. 1) – pri predstavlenii raboty na angliyskom yazyke.

Formuly rekomenduetsya oformlyat' vnutri tablicy, sostoyaschey iz dvuh stolbcov. V pervom stolbce privoditsya sama formula, oformlennaya redaktorom formul ili v vide izobrazheniya. Vo vtorom stolbce shirinoy 1 sm privoditsya poryadkovyy nomer formuly, zaklyuchennyy v skobki pri sozdanii perekrestnyh ssylok v tekste. Esli neobhodimost' davat' perekrestnye ssylki otsutstvuet, vtoroy stolbec ne sozdayut. Posle formuly stavitsya zapyataya, kogda privoditsya rasshifrovka simvolov formuly, ili tochka; poryadkovyy nomer formuly posle zapyatoy ili tochki raspolagaetsya na etoy zhe stroke, s vyravnivaniem po pravomu krayu.

Dlya stateynyh tablic privoditsya oboznachenie «Tablica» (ili 'Table' dlya stat'i na angliyskom yazyke), poryadkovyy nomer (bez oboznacheniya znaka nomera), a posle tochki daetsya naimenovanie tablicy. Tekst, krome samogo naimenovaniya tablicy vydelyaetsya poluzhirnym nachertaniem. Sledom v stat'e na russkom yazyke privoditsya nazvanie tablicy na angliyskom yazyke. Rekomenduetsya umen'shenie shrifta v tablice do 10 pt (dopuskaetsya do 8 pt). Tablicy raspolagayutsya tol'ko posle ih upominaniya (ili perekrestnoy ssylki) v tekste stat'i. Upominanie privedennoy tablicy po tekstu stat'i yavlyaetsya obyazatel'nym i privoditsya v skobkah, v kotoryh dayut oboznachenie, naprimer: (tabl. 1) – pri predstavlenii raboty na russkom yazyke, ( Table 1) – pri predstavlenii raboty na angliyskom yazyke.

Stat'ya zakanchivaetsya razdelom «Spisok istochnikov» (v stat'e na angliyskom yazyke –  razdelom 'References'), shrift Times New Roman, kegl' 10 pt. Optimal'noe kolichestvo citirovannyh istochnikov ot 15 do 20 (no ne menee 10), pri etom v spisok rekomenduetsya vklyuchit' ne menee 3 rabot, predstavlyayuschih zhurnaly iz yadra RINC ili vhodyaschih v bazy dannyh WoS/Scopus. V obzornyh rabotah prinimaetsya ne menee 40-50 ssylok na literaturnye istochniki. Pod spiskom literaturnyh istochnikov privodyatsya nadpisi kursivom, kazhdaya – s novoy stroki: «Postupila v redakciyu», «Odobrena posle recenzirovaniya», «Prinyata k opublikovaniyu».

Format

Redakciya prinimaet teksty, sohranennye v formatah .doc. ili .docx. Materialy, ne sootvetstvuyuschie ukazannym trebovaniyam i predstavlennye v drugih formatah, ne rassmatrivayutsya.

Oformlenie literaturnyh ssylok

Vse zatekstovye bibliograficheskie ssylki v stat'e na russkom yazyke sostavlyayut po GOST R 7.0.5 i GOST R 7.0.100, v stat'e na angliyskom yazyke – soglasno mezhdunarodnomu stilyu oformleniya Harvard.

Dopolnitel'no v stat'e na russkom yazyke privodyat perechen' zatekstovyh bibliograficheskih ssylok na latinice ('References'), soglasno mezhdunarodnomu stilyu oformleniya Harvard.

Izdaniya, kotorye ne perevodyatsya, neobhodimo ukazat' transliteraciey v sootvetstvii s obscheprinyatymi mezhdunarodnymi pravilami, v konce kazhdogo takogo istochnika dolzhna stoyat' pometka (in Russian) (sm. http://www.cas.org/expertise/cascontent/caplus/corejournals.html).

Dlya zhurnal'noy stat'i dolzhny byt' ukazany familii i inicialy vseh avtorov, nazvanie stat'i, sokraschennoe nazvanie zhurnala (esli dopuskaetsya, naprimer: Izv. vuzov. Himiya i him. tehnologiya) god, nomer toma, nomer ili vypusk, diapazon stranic i DOI (pri ih nalichii, v sluchae, esli citiruemaya stat'ya napechatana na russkom yazyke).

 

Primery oformleniya literaturnyh istochnikov (stat'i, monografii, patenty na izobretenie, internet-dannye)
na russkom i angliyskom yazykah

SPISOK ISTOChNIKOV

1. Treybaks E.A. Ispol'zovanie unikal'nyh svoystv kleenyh derevyannyh paneley CLT v stroitel'stve obschestvennyh zdaniy // Innovacii v nauke. 2017.  № 10 (71). S. 68-69.

2. Ammari M.S., Belhadj B., Bederina M., Ferhat A., Quéneudec M. Contribution of hybrid fibers on the improvement of sand concrete properties: Barley straws treated with hot water and steel fibers // Construction and building materials. 2020. Vol. 233, no. 8. DOI: 10.1016/j.conbuildmat.2010.117374

3. Titunin A.A., Zayceva K.V. Proektirovanie i proizvodstvo stroitel'nyh materialov iz drevesiny. Kompleksnyy podhod. Kostroma: Izd-vo Kostrom. gos. tehnol. un-ta, 2009. 185 s.

4. Yargina Z.N. Estetika goroda. M.: Stroyizdat, 1991. 365 s.

5. V Rossii budet obespecheno shirokoe vnedrenie mnogoetazhnogo derevyannogo domostroeniya // Minstroy Rossii: [sayt]. URL: https://minstroyrf.gov.ru/press/v-rossii-budet-obespecheno-shirokoe-vnedrenie-mnogoetazhnogo-derevyannogo-domostroeniya/ (data obrascheniya 10.10.2023). 

6. Citation guides / Mendeley [Elektronnyy resurs]. URL: https://www.mendeley.com/guides/citation-guides/ (data obrascheniya: 05.04.2022).

7. Patent № 2667367 Rossiyskaya Federaciya, MPK B28C 5/00 (2006.01), B28C 9/02 (2006.01). Sposob polucheniya betonnoy smesi s utilizaciey ranee poluchennyh ostatkov etoy smesi: opubl. 19.09.2018 / Kogan Artem Sergeevich.

Postupila v redakciyu 
Odobrena posle recenzirovaniya 
Prinyata k opublikovaniyu

REFERENCES

1. Treybaks, E. A. (2017) Utilization of unique properties of glued wood CLT panels in the construction of public buildings, Innovatsii v nauke, 10(71), pp. 68-69 (in Russian).

2. Ammari, M. S., Belhadj, B., Bederina, M., Ferhat, A. & Quéneudec, M. (2020) Contribution of hybrid fibers on the improvement of sand concrete properties: Barley straws treated with hot water and steel fibers, Construction and Building Materials, 233(8). DOI: 10.1016/j.conbuildmat.2019.117374.

3. Titunin, A. A. & Zaitseva, K. V. (2009) Design and production of construction materials of wood. Complex approach. Kostroma: Izd-vo Kostrom. gos. tekhnol. un-ta (in Russian).

4. Yargina, Z. N. (1991) Aesthetics of the city. Moscow: Stroyizdat (in Russian).

5. Ministry of Construction of Russia. (2022) Russia will ensure widespread introduction of multi-storey wooden house building [online]. Available at: https://minstroyrf.gov.ru/press/v-rossii-budet-obespecheno-shirokoe-vnedrenie-mnogoetazhnogo-derevyannogo-domostroeniya (accessed 10.10.2023) (in Russian).

6. Citation Guides / Mendeley [online]. Available at: https://www.mendeley.com/guides/citation-guides/ (accessed 05.04.2022).

7. Ferrari, G., Surico, F., Brocchi, A., Banfi, E., Maltese, C. & Squinzi, M. (2019) Method for recycling concrete, IT, Patent EP 2,468,695 A1.

Received
Approved after reviewing
Accepted

Publication Ethics

Ethical standards for publication exist to ensure high-quality scientific publications, public trust in scientific findings, and that people receive credit for their work and ideas. Journal Smart Composite in Construction publication ethics and research integrity help to ensure the accuracy and trustworthiness of an article. We adhere the provisions of the II World Conference on the Integrity of Scientific Research, the provisions of the Committee on Ethics of Scientific Publications (The Committee on Publication Ethics – COPE).

  1. Authorship and Authors' Responsibilities

1.1. When submitting a manuscript to the Journal, author (authors) confirming the manuscript has not been published previously (except in the form of an abstract, a published lecture or academic thesis), the manuscript is not under consideration for publication elsewhere, and checked for plagiarism from other publications. In case the work is based on material previously published as a report, preprint, proceedings, etc. author (authors) should inform the Editorial Board.

1.2. Authors are the persons who have contributed sufficiently to the research, analysis, etc. to be listed on the byline of the manuscript. Before submitting, all authors must approve the manuscript and give their consent for submission and publication. The Corresponding author takes primary responsibility for communication with the Journal during the manuscript submission, peer review, and publication process. The Corresponding Author informs the co-authors of the manuscript’s status throughout the submission, review, and publication process.

1.3. Researchers should present their results honestly and without fabrication, falsification, or inappropriate data manipulation.

1.4. The author (authors) guarantees the absence of plagiarism in the manuscript. In case the fragments of works or statements of other persons are used, the authors provide appropriate bibliographic references or citations. In case of using of other researchers works or statements, the authors provide appropriate bibliographic references or quotations.

1.5. Authors should prevent self-plagiarism and refer to their previous works correctly. Author (authors) is not allowed to present the identical data in several publications, copying and paraphrasing the same information.

1.6. The authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed as influencing the results or interpretation of their manuscript.

1.7. When an author (authors) discovers a significant error or inaccuracy in his/her own published work, it is the authors obligation to promptly notify the Journal Editor and cooperate with the Journal to retract or correct the work.

  1. Reviewers Roles and Responsibilities

2.1. Reviewing upholds the integrity of the Journal by identifying invalid research and helping to maintain the quality of the Journal. Our collaborative peer review maximizes manuscript quality by using a rigorous, constructive, and transparent review process managed by active researchers. Moreover, reviewing is a necessary component of formal scholarly communications providing accomplished academic approach. We believe, the authors can ensure the rigorous standards of the scientific process by taking part in the peer-review system.

2.2. An insufficiently competent or time-constrained reviewer should promptly notify the Editor and request to be excluded from the manuscript review process.

2.3. Any manuscript submitted is a confidential document. This paper not be discussed with any other individual not authorised by the Editor.

2.4. The reviewer is obliged to assess the manuscript objectively. Personal criticism of the author is unacceptable. Reviewers should express their views clearly with appropriate supporting arguments.

2.5. Reviewers should pay attention to substantial drawbacks and gaps in the references. Any statement (argument, conclusion, etc.) published previously in the manuscript should be accompanied by an appropriate reference. Reviewers should identify works that are relevant to the paper, which were not referred to by the authors. Every allegation that an observation, conclusion, or argument has been made previously must be supported by a reference. The reviewer should also draw the Editor's attention to any significant similarities and intersections between the manuscript under consideration and any other published paper of which he or she is personally aware.

2.6. Unpublished materials contained in the submitted manuscript should not be used in the reviewer's own research without the explicit written consent of the author (authors). The information or ideas obtained during the review should remain confidential and not be used for personal purposes until the publication of the paper and without the permission of the author (authors). Information or ideas obtained during the reviewing related to benefits should be kept confidential.

2.7. Reviewers should not participate in the review of manuscripts in the event of conflicts of interest due to competitive, collaborative, and other interactions and relationships with any of the authors, companies or other organizations associated with the submitted work.

  1. Editors Responsibilities

3.1. The Editor of the Journal is solely and independently responsible for deciding which of the articles submitted to the Journal should be published. Validation of the work in question and of its importance to researchers and readers must always support such decisions. Basis of the publication decision is always the scientific relevance of the work, its relevance and significance, scientific novelty, and reliability.

The Editor makes objective decision regardless of commercial considerations and provides fair and efficient review process.

3.2. The Editor evaluates the articles for their intellectual content, regardless of race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the authors.

3.3. The Editor should not disclose any information about the submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial consultants, and the publisher, as the case may be.

3.4. Editors manage conflict situations arising in the process and use all available methods to resolve them.

3.5. An Editor presented with convincing evidence that the substance or conclusions of a published article are erroneous should promote the publication of a correction or retraction.

  1. Publisher Responsibilities 

4.1. The publisher follows principles and procedures that facilitate the performance of ethical duties by editors, reviewers, and authors in accordance with these requirements. The publisher should be sure that its overall revenue setting did not influence the Editors' decision making.

4.2. The publisher should adopt policies and procedures that support editors, reviewers, and authors of the Journal in performing their ethical duties under these ethics guidelines. The publisher should support editors in the review of complaints raised concerning ethical issues and help communications with other journals and/or publishers where this is useful to editors.

4.3. The publisher should develop codes of practice and inculcate industry standards for best practice on ethical matters, errors, and retractions.

  1. Articles withdrawal and retraction

When considering situations related to the withdrawal(retraction) of articles, the Editorial Board and publisher of the Journal Smart Composites in Construction are guided by the recommendations of the Committee on Publication Ethics (COPE Retraction Guidelines) and Alliance of Independent Regional Publishers, AIRP (The Rules of Withdrawal (Retraction) of an Article from Publication).

Reasons for withdrawal of an article:

  • falsification is publishing data or conclusions that were not generated by experiments or observations by data manipulation.
  • duplication of submitted materials in several editions.
  • plagiarism.

If authors wish to withdraw an article after it has been accepted, they should communicate their decision to the Journal's Editorial Board as soon as possible. The process may involve sending an official withdrawal request along with a brief explanation of the reason for the withdrawal.

After withdrawal, the article remains on the Journal's website as part of the corresponding issue and retains the DOI identifier but is marked as withdrawn one. A note to that effect is made in the issues' Table of Contents. The original article is retained unchanged except for a watermark on the .pdf indicating on each page that it is “retracted.”

The Editorial Board publishes a statement on the withdrawal of the article with the reasons and the date of retraction on the official website of the Journal and in the forthcoming printed issue.

Information on withdrawal of the article and its PDF-version with appropriate labelling are sent to the National Electronic Library (elibrary.ru) and other bibliographic bases the Journal included. The information is also submitted to the Alliance of Independent Regional Publishers, AIRP for entry it into the Unified Database of Retracted Articles.

Publication fee

No fee is charged from the authors during the submission, evaluation, and publication process.

The Editorial Board does not charge the authors for the manuscript submission, reviewing, or publication.

Disclosure and Conflicts of Interest

Unpublished materials disclosed in a submitted manuscript must not be used in own research without the express written consent of the author (authors).

Information or ideas obtained during the reviewing related to benefits should be kept confidential.

Reviewers should not participate in the review of manuscripts in the event of conflicts of interest due to competitive, collaborative, and other interactions and relationships with any of the authors, companies or other organizations associated with the submitted work.

Plagiarism

The Editorial Board of the Journal  Smart Composites in Construction, when reviewing the manuscript can undergo a multi-step anti-plagiarism check independently verify the received materials using the Anti-Plagiarism system. In case of plagiarism detection, the Editorial Board acts in accordance with COPE rules.

Preprint and Postprint Policy

When submitting an article, the author is required to confirm the manuscript has not been published or accepted for publication in another scientific Journal. When referring to an article published in the Journal Smart Composites in Construction, the publisher asks you to place a link (the full URL of the material) on the official website of the Journal.

Articles previously posted by authors on personal or public sites not affiliated with other publishers are allowed for review

Polozhenie o recenzirovanii rukopisey v zhurnale

«Umnye kompozity v stroitel'stve» / «Smart Comprosite in Construction»

 

  1. Obschie polozheniya

1.1 Nastoyaschee Polozhenie ustanavlivaet proceduru ekspertnoy ocenki rukopisey, napravlyaemyh v redakciyu zhurnala «Umnye kompozity v stroitel'stve Smart Composite in Construction».

1.2 Cel'yu ekspertnoy ocenki yavlyaetsya obespechenie vysokogo kachestva materialov, publikuemyh na stranicah zhurnala.

1.3 Dannoe Polozhenie razrabotano v sootvetstvii s publikacionnoy etikoy zhurnala «Umnye kompozity v stroitel'stve Smart Composite in Construction». 

  1. Poryadok recenzirovaniya statey, napravlennyh v redakciyu recenziruemogo izdaniya

2.1 Izdanie osuschestvlyaet recenzirovanie vseh postupayuschih v redakciyu materialov, sootvetstvuyuschih tematike, s cel'yu ih ekspertnoy ocenki. Vse recenzenty yavlyayutsya priznannymi specialistami po tematike recenziruemyh materialov i imeyut v techenie poslednih 3 let (k momentu polucheniya rukopisi) publikacii po tematike recenziruemoy stat'i.

2.2 Postupivshaya rukopis' prohodit process pervichnoy ocenki, s pozicii sootvetstviya formal'nym trebovaniyam izdaniya, a imenno: tematike zhurnala i perechnyu podderzhivaemyh nauchnyh special'nostey, pravilam oformleniya statey, original'nosti, yasnosti i logichnosti izlozheniya. V sluchae nesootvetstviya etim trebovaniyam stat'ya ne prinimaetsya k rassmotreniyu, o chem redakciya izveschaet avtora, s ukazaniem prichiny otkaza.

2.3 Reshenie o sootvetstvii rukopisi formal'nym trebovaniyam izdaniya prinimaetsya v techenie 15 dney, nachinaya s daty postupleniya rukopisi v redakciyu.

2.4 Recenzentom ne mozhet byt' avtor ili soavtor recenziruemoy stat'i, a takzhe nauchnye rukovoditeli soiskateley uchenoy stepeni i sotrudniki podrazdeleniya, v kotorom rabotaet avtor, predstavivshiy stat'yu. Recenzenty ne imeyut prava ispol'zovat' v lichnyh celyah recenziruemye rukopisi i peredavat' ih tret'im licam. Srok recenzirovaniya rukopisey ne dolzhen prevyshat' 30 kalendarnyh dney s momenta napravleniya rukopisi recenzentu. Okonchatel'noe reshenie ob opublikovanii postupivshih materialov redakciya zhurnala prinimaet posle rassmotreniya originala recenzii.

2.5 Redakciya izdaniya napravlyaet avtoram predstavlennyh materialov kopii recenziy ili motivirovannyy otkaz, a takzhe obyazuetsya napravlyat' kopii recenziy v Ministerstvo nauki i vysshego obrazovaniya Rossiyskoy Federacii pri postuplenii sootvetstvuyuschego zaprosa.

  1. Trebovaniya k soderzhaniyu recenzii

3.1 Recenziya dolzhna soderzhat' ob'ektivnyy analiz rukopisi, otrazhat' ocenku kachestva rukopisi ekspertom.

3.2 Recenziya sostavlyaetsya po standartnoy forme, predlagaemoy redakciey, ili v svobodnom vide i dolzhna soderzhat' sleduyuschie elementy:

– aktual'nost' tematiki issledovaniya, predstavlennoy v rukopisi;

– nauchnaya novizna materialov;

– sootvetstvie soderzhaniya rukopisi ee nazvaniyu;

– sootvetstvie ispol'zovannyh avtorom metodik, rekomendaciy i rezul'tatov issledovaniya sovremennym dostizheniyam nauki i praktiki;

– dostovernost' izlozhennyh faktov, polnota raskrytiya temy;

– celesoobraznost' i obosnovannost' nalichiya v rukopisi tablic, grafikov, inyh illyustracionnyh i demonstracionnyh materialov;

– sootvetstvie vyvodov celyam i zadacham issledovaniya, ih argumentirovannost';

– kachestvo prorabotki literaturnyh istochnikov;

– ocenka lichnogo vklada avtora rukopisi v reshenie izuchaemoy problemy;

– kachestvo oformleniya rukopisi: stil', terminologiya, formulirovki.

3.3 Zaklyuchitel'naya chast' recenzii dolzhna soderzhat' rekomendaciyu:

– ob opublikovanii rukopisi v zhurnale;

– o dorabotke rukopisi (s ukazaniem konkretnyh zamechaniy ili rekomendaciy);

– ob otklonenii rukopisi (s obosnovaniem mneniya eksperta).

3.4 Recenziya podpisyvaetsya ekspertom s rasshifrovkoy ego familii, imeni i otchestva, prostanovkoy daty, ukazaniem uchenoy stepeni, uchenogo zvaniya i zanimaemoy dolzhnosti na moment rassmotreniya rukopisi.

3.5 Original recenzii napravlyaetsya v redakcionnuyu kollegiyu zhurnala.

  1. Poryadok predstavleniya recenzii avtoram

4.1 Recenziya (libo ee chast') napravlyaetsya glavnym redaktorom zhurnala ili ego zamestitelem po zaprosu avtora rukopisi, bez ukazaniya familii, dolzhnosti i mesta raboty recenzenta.

4.2 Pri polozhitel'noy ocenke rukopisi recenzentom i redakcionnoy kollegiey zhurnala, glavnyy redaktor ili ego zamestitel' soobschaet avtoru o prinyatii ego rukopisi i planiruemom sroke opublikovaniya predstavlennyh materialov.

4.3 Pri vydache recenzentom rekomendaciy po dorabotke ili zamechaniy rukopis' napravlyaetsya avtoru s ukazaniem sroka, v techenie kotorogo eti zamechaniya dolzhny byt' ustraneny, a rukopis' dorabotana. Dorabotannaya rukopis' s otvetami avtora na zamechaniya (rekomendacii) napravlyaetsya na povtornoe rassmotrenie etomu zhe recenzentu.

4.4 V sluchae konflikta interesov ili nesoglasiya avtora s zamechaniyami (rekomendaciyami) recenzenta, rukopis', po hodataystvu avtora, mozhet byt' napravlena na povtornoe recenzirovanie drugomu ekspertu.

4.5 Pri poluchenii otricatel'noy recenzii na rukopis' redakcionnaya kollegiya zhurnala imeet pravo napravit' materialy na dopolnitel'noe recenzirovanie ili dorabotku avtoru s posleduyuschim povtornym recenzirovaniem, ili otklonit' rukopis'.

4.6 V sluchae otkloneniya rukopisi avtoru napravlyaetsya pis'mo s ukazaniem prichin otkaza prinyat' materialy k opublikovaniyu.

  1. Zaklyuchenie

5.1 Recenzii hranyatsya v redakcii zhurnala v techenie 5 let.

5.2 Recenzii predstavlyayutsya v VAK pri Ministerstve nauki i vysshego obrazovaniya Rossiyskoy Federacii pri nalichii zaprosa so storony VAK.

                        Dubrovina Yulia
Dubrovina Yulia Kostroma State Agricultural Academy


                        Dudin Vladimir
Dudin Vladimir Yaroslavl State Technical University


                        Emelin Victor
Emelin Victor Ivanovo State Polytechnic University


                        Zhuchkov Viktor Evgen'evich
Zhuchkov Viktor Evgen'evich Departament stroitel'stva Yaroslavskoy oblasti (Direktor)


                        Zaitsev Ivan
Zaitsev Ivan Ivanovo State Polytechnic University


                        Zaitseva Irina
Zaitseva Irina Ivanovo State Polytechnic University


                        Zakrevskaya Lyubov Vladimirovna
Zakrevskaya Lyubov Vladimirovna Vladimir State University named after Alexander and Nikolay Stoletovs


                        Zaharov Aleksandr
Zaharov Aleksandr OOO «Kvartal-Invest» (Zamestitel' direktora po arhitekturno-gradostroitel'nomu proektirovaniyu)
candidate of architecture
Academic rank Sovetnik RAASN
professor

                        Ivanov Alexander
Ivanov Alexander Yuri Gagarin State Technical University of Saratov


                        Ignatyev Aleksey
Ignatyev Aleksey Russian Road Research Institute
candidate of technical sciences


                        Ignatyev Alexey
Ignatyev Alexey Yaroslavl State Technical University (Hydraulic and Road Engineering Department)


                        Ilyin Dmitriy
Ilyin Dmitriy OOO (Limited Liability Company) «Technonicol-Stroitelniye sistemy»


                        Isaeva Natal'ya
Isaeva Natal'ya Ivanovo State Polytechnic University (Department of Costume and Textile Design)


                        Isachenko Sergey
Isachenko Sergey Moscow State University of Civil Engineering


                        Istomina Katarina
Istomina Katarina Perm National Research Polytechnic University


                        Kalaev Ramil
Kalaev Ramil Yaroslavl State Technical University
student


                        Kalayeva Sahiba
Kalayeva Sahiba Yaroslavl State Technical University (Associate Professor)
doctor of technical sciences


                        Kalinin Alexey
Kalinin Alexey Yaroslavl State Technical University (Hydraulic and Road Engineering Department)


                        Kamenskikh Alexander
Kamenskikh Alexander Russian Road Scientific-Research Institute (ROSDORNII)


                        Kanaeva Nadezhda
Kanaeva Nadezhda Ogarev Mordovia State University


Fedosov Sergey  — Editor-in-Chief
Moscow State University of Civil Engineering (Kafedra «Tehnologiya i organizaciya stroitel'nogo proizvodstva», Professor)
doctor of technical sciences

academician Russian Academy of Architecture and Construction Sciences ,
professor
Moscow, Moscow, Russian Federation
Razgovorov Pavel  — Deputy Editor-in-Chief
Yaroslavl State Technical University (Nachal'nik upravleniya organizacii nauchno-issledovatel'skoy i intellektual'noy deyatel'nosti)
doctor of technical sciences

professor
Yaroslavl, Yaroslavl, Russian Federation
Kalayeva Sahiba  — Executive secretary
Yaroslavl State Technical University (Associate Professor)
doctor of technical sciences

Yaroslavl, Yaroslavl, Russian Federation
Abdykalykov Akymbek Abdykalykovich  — Member of the editorial team
Kyrgyzskiy gosudarstvennyy universitet stroitel'stva, transporta i arhitektury im. N. Isanova (Rector)
doctor of technical sciences

professor
Kyrgyzstan
Akimov Pavel  — Member of the editorial team
Moscow State University of Civil Engineering (Rector)
doctor of technical sciences

academician Russian Academy of Architecture and Construction Sciences ,
professor
Moscow, Moscow, Russian Federation
Bakanov Maksim  — Member of the editorial team
Ivanovskaya pozharno-spasatel'naya akademiya GPS MChS Rossii (Nachal'nik uchebno-nauchnogo kompleksa «Pozharotushenie»)
doctor of technical sciences
Academic rank Sovetnik RAASN
docent
Ivanovo, Ivanovo, Russian Federation
Belov Vladimir  — Member of the editorial team
Tver Stare University (Kafedra "proizvodstva stroitel'nyh izdeliy i konstrukciy", Zaveduyuschiy kafedroy)
doctor of technical sciences
Academic rank Sovetnik RAASN
professor
Tver, Tver, Russian Federation
Belostockiy Aleksandr  — Member of the editorial team
Moscow State University of Civil Engineering (Kafedra informatiki i prikladnoy matematiki., Professor)
doctor of technical sciences

academician Russian Academy of Architecture and Construction Sciences ,
professor
Moscow, Moscow, Russian Federation
Vatin Nikolay  — Member of the editorial team
Saint-Petersburg State University of Architecture and Construction (kafedra «Stroitel'stvo unikal'nyh zdaniy i sooruzheniy», Professor)
doctor of technical sciences
Academic rank Sovetnik RAASN
professor
Sankt-Peterburg, St. Petersburg, Russian Federation
Gotovcev Valeriy  — Member of the editorial team
Yaroslavl State Technical University (Kafedra «Upravlenie predpriyatiem»., Professor)
doctor of technical sciences

professor
Yaroslavl, Yaroslavl, Russian Federation
Zaharov Aleksandr  — Member of the editorial team
OOO «Kvartal-Invest» (Zamestitel' direktora po arhitekturno-gradostroitel'nomu proektirovaniyu)
candidate of architecture
Academic rank Sovetnik RAASN
professor
Ivanovo, Ivanovo, Russian Federation
Kapranova Anna  — Member of the editorial team
Yaroslavl State Technical University (Kafedra "Teoreticheskaya i prikladnaya mehanika", Zaveduyuschaya kafedroy)
doctor of physical and mathematical sciences

professor
Yaroslavl, Yaroslavl, Russian Federation
Kolchunov Vitaliy  — Member of the editorial team
Southwest State University (Kafedra unikal'nyh zdaniy i sooruzheniy, Zaveduyuschiy kafedroy)
doctor of technical sciences

academician Russian Academy of Architecture and Construction Sciences ,
professor
Kursk, Kursk, Russian Federation
Kotlov Vitaliy  — Member of the editorial team
Volga State University of Technology (Prorektor po vospitatel'noy rabote)
doctor of technical sciences
Academic rank Sovetnik RAASN
docent
Yoshkar-Ola, Yoshkar-Ola, Russian Federation
Kudryashov Nikolay  — Member of the editorial team
Yaroslavl State Technical University (Nauchnyy rukovoditel' Instituta arhitektury i dizayna)
candidate of architecture

professor
Yaroslavl, Yaroslavl, Russian Federation
Lebedev Anton  — Member of the editorial team
Yaroslavl State Technical University (Kafedra tehnologicheskih mashin i oborudovaniya, Professor)
doctor of technical sciences

docent
Yaroslavl, Yaroslavl, Russian Federation
Leonovich Sergey Nikolaevich  — Member of the editorial team
Belarusian National Technical University (Kafedra "Stroitel'nye materialy i tehnologii stroitel'stva", Head of the Department)
doctor of technical sciences

academician Russian Academy of Architecture and Construction Sciences ,
professor
Minsk, Belarus
Mondrus Vladimir L'vovich  — Member of the editorial team
Moscow State University of Civil Engineering (Kafedra stroitel'noy i teoreticheskoy mehaniki, Zaveduyuschiy kafedroy)
doctor of technical sciences

corresponding member Russian Academy of Architecture and Construction Sciences ,
professor
Moscow, Russian Federation
Mohov Andrey  — Member of the editorial team
Moscow State University of Civil Engineering (Kafedra avtomatiki i elektrosnabzheniya, Professor)
doctor of technical sciences

professor
Moscow, Moscow, Russian Federation
Nizina Tatyana  — Member of the editorial team
Ogarev Mordovia State University (I.o. direktora Instituta arhitektury i stroitel'stva)
doctor of technical sciences

professor
Saransk, Saransk, Russian Federation
Pospelov Pavel  — Member of the editorial team
The Moscow State Technical University - MADI (Kafedra izyskaniya i proektirovaniya, Zaveduyuschiy kafedroy)
doctor of technical sciences

professor
Moscow, Moscow, Russian Federation
Puharenko Yuriy  — Member of the editorial team
Saint-Petersburg State University of Architecture and Construction (Kafedra tehnologii stroitel'nyh materialov i metrologii, Zaveduyuschiy kafedroy)
doctor of technical sciences

corresponding member Russian Academy of Architecture and Construction Sciences ,
professor
Sankt-Peterburg, St. Petersburg, Russian Federation
Rudobashta Stanislav Pavlovich  — Member of the editorial team
Russian State Agrarian University - Moscow Timiryazev Agricultural Academy (Kafedra teplotehniki, gidravliki i energoobespecheniya predpriyatiy, Professor)
doctor of technical sciences

professor
Moscow, Russian Federation
Rumyanceva Varvara  — Member of the editorial team
Ivanovo State Polytechnic University (Direktor instituta informacionnyh tehnologiy, estestvennyh i gumanitarnyh nauk)
doctor of technical sciences

corresponding member Russian Academy of Architecture and Construction Sciences ,
professor
Ivanovo, Ivanovo, Russian Federation
Selyaev Vladimir Pavlovich  — Member of the editorial team
Ogarev Mordovia State University (Kafedra stroitel'nyh konstrukciy, Zaveduyuschiy kafedroy)
doctor of technical sciences

academician Russian Academy of Architecture and Construction Sciences ,
professor
Saransk, Saransk, Russian Federation
Tarshis Mikhail  — Member of the editorial team
Yaroslavl State Technical University (Kafedra "Teoreticheskaya i prikladnaya mehanika", Professor)
doctor of technical sciences

docent
Yaroslavl, Yaroslavl, Russian Federation
Travush Vladimir  — Member of the editorial team
ZAO "Gorproekt" (Glavnyy konstruktor)
doctor of technical sciences
Academic rank Vice-prezident RAASN
academician Russian Academy of Architecture and Construction Sciences
Moscow, Moscow, Russian Federation
Treschev Aleksandr  — Member of the editorial team
Tula State University (Kafedra stroitel'stva, stroitel'nyh materialov i konstrukciy, Zaveduyuschiy kafedroy)
doctor of technical sciences

corresponding member Russian Academy of Architecture and Construction Sciences ,
professor
Tula, Tula, Russian Federation
Fedoseev Vadim  — Member of the editorial team
Ivanovo State Polytechnic University (Kafedra organizacii proizvodstva i gorodskogo hozyaystva, Professor)
doctor of technical sciences

professor
Ivanovo, Ivanovo, Russian Federation
Mitrović Radivoje  — Foreign member of the editorial team
Belgrade University (Dekan fakul'teta mashinostroeniya)
doctor of technical sciences

professor
Serbia
Dobrokhotov Vladimir Borisovich  — Editor

Yaroslavl, Russian Federation
Tyukina Lyudmila  — English translation
Yaroslavl State Technical University

Yaroslavl, Yaroslavl, Russian Federation
Frolov Aleksandr  — Layout designer
Yaroslavl State Technical University (kafedra "Obschaya i fizicheskaya himiya", Associate Professor)
candidate of chemical sciences

Yaroslavl, Yaroslavl, Russian Federation
ORCID:0000-0002-0491-7452

VAC

Code 2.1.1
Name Строительные конструкции, здания и сооружения
Code 2.1.5
Name Строительные материалы и изделия
Code 2.1.8
Name Проектирование и строительство дорог, метрополитенов, аэродромов, мостов и транспортных тоннелей
Code 2.1.12
Name Архитектура зданий и сооружений. Творческие концепции архитектурной деятельности

Mission

Our mission is to introduce the latest achievements of scientists and researchers in construction sciences, urban planning, architecture, and legitimate exchange of scientific knowledge and practical experience acquired by representatives of different generations working to solve the actual construction industry development challenges.

The scientific peer-reviewed Journal Smart Composite in Construction publishes original research papers, review articles, and case studies to promote rapid communication and exchange among scholars, architects, and engineers. It introduces and reviews significant and pioneering achievements in architecture and construction research. Subject areas include the results of original research by authors working in Russia and abroad on the primary branches of architecture, such as architectural design and theory, urban science, design and building structures with increased reliability and earthquake resistance, creation of building materials and composites with new physical, chemical and consumer properties, including the use of waste from industrial enterprises, as well as studying the design and construction of modern buildings, roads, tunnels, airports, bridges, etc. We implement a creative approach to solving urgent tasks of public areas architectural content, preservation of unique objects of cultural and historical heritage of ancient builders and craftsmen for descendants.

Online-only Journal content is published 4 times a year. Registered by Federal Service for Supervision of Communications, Information Technology and Mass Media, Certificate EL No FS 77 - 79733 on 27.11.2020.

The Journal does not charge a submission fee or publication fee.

The Editorial Board accepts articles in Russian and English. Articles submitted to the editorial office in English are published in it without translation into Russian. The Editorial Board translates manuscripts received in Russian into English upon request and prior agreement with the authors.

All manuscripts are subject to peer review and are expected to meet standards of academic excellence.

General Founder and Publisher of the Journal: Federal State Budgetary Educational Institution of Higher Education "Yaroslavl State Technical University", 150023, Russia, Yaroslavl, Moskovsky Prospekt, 88

Login or Create
* Forgot password?